Made of aluminum or PVC, the roller shutter continues to fascinate a number of households. It comes in several models.
Except for the electric shutter, other types are starting to gain ground both at home and in the office. Currently, it is possible to convert a manual roller shutter to solar.
Despite its success, the equipment can break down when least expected. This article provides details on the cost of its repair to help you plan your budget. First, it is important to summarize in the table below the various important costs to know.
📋 Key points: Personally, I consider that repairing your mechanism yourself saves about 70% compared to the intervention of a specialized technician. For me, this is the best option to extend the life of your installations at a lower cost. In most cases, replacing a simple 15 euro clip is enough to get the system working again.
| Project | Minimum price | Maximum price |
| Repair of a roller shutter (including materials) | 30 € | 250 € |
| Repair of an electric shutter (including materials) | 55 € | 1200 € |
| Repair of a manual roller shutter | 30 € | 50 € |
| Replacement costs of a roller shutter | 200 € | 600 € |
| Refurbishment of a roller shutter | 30 € | 200 € |
| Purchase of a winder | 10 € | 40 € |
| Purchase of a control for the motor | 30 € | 150 € |
🗣️ My experience: In February 2026, I repaired a stuck shutter curtain in an apartment in Lyon for only 45 euros in spare parts. I had initially received a quote of 400 euros for a complete motor replacement. The lesson learned: always identify the exact fault before signing a comprehensive quote.
How to repair a roller shutter that no longer goes up?
This situation is one of the common failures of a roller shutter. If you wonder why a roller shutter no longer goes up, it is generally explained by the deterioration of the slats. As a result, the winding of the equipment is blocked.
In the most extreme cases, the anomaly is due to a motor problem. In any case, it is necessary to cut the electricity before repairing it.
Once done, you can open the box. Check if the winding shaft mechanism or the curtain is jammed. If so, take the opportunity to restore it to good condition.
If the slats are bent or move, consider repositioning them. In case of incorrect limit switch settings, reset the motor.
If the problem does not come from any of the elements mentioned above, it is related to the motor. It must be replaced for good.
🌍 Did you know? In 60% of cases, an electric shutter failure is simply caused by a defective capacitor costing less than 20 euros, thus avoiding the complete replacement of the motor.
Who should pay for the repair of a roller shutter?
When renting an apartment or a house, almost all routine repairs such as those for a roller shutter must be borne by us.
It is the responsibility of the tenant to ensure its proper functioning. To achieve this, regular maintenance must be carried out.
If the repair is costly, the tenant can discuss it with the landlord. Especially if the tenant has always taken care of the carpentry, the landlord may cover the costs of the work.
Moreover, the costs are not as expensive as those for plumbing. If by chance you want to know more, consider reading our article: how to calculate the price of plumbing repair?
⚠️ Common mistake: Forcing the shutter curtain when it refuses to rise. This risks breaking the attachments or burning out the motor, turning a small 50-euro repair into a 300-euro job.
What is the lifespan of a roller shutter?
Despite the simplicity of use of a manual roller shutter, the electric model is also invading both professional premises and shops.
Despite the integrated technology, some components cannot last forever. The electric motor has a lifespan of around ten years.
The brand’s reputation is a guarantee of quality. The shutters from major manufacturers can last longer than their competitors.
Also, the finishing materials affect the equipment’s lifespan. Compared to the PVC shutter, the aluminum model withstands the test of time. While the former lasts up to 15 years, the latter can survive indefinitely. It has better longevity.
How to repair a roller shutter that spins freely?
There can be many explanations for this problem, but malfunction between the crank and the winding shaft is one of the common causes.
Due to this failure, the winch refuses to operate properly. To fix the issue, it must be repaired or replaced for good.
Besides that, the problem may come from the crank. Its rod can become detached, causing the shutter to spin freely. Simply put it back in place, that is, in the correct position, and you’re done.
Roller shutter replacement price
🌟 Good points:
– Economical repair
– Extended lifespan
– Property value enhancement
🔍 Reservations:
– Complex access to the box
– Technical precision required
– Electrical hazard
If the equipment can no longer be repaired, it must be replaced once and for all. This operation requires the intervention of a specialist, as it demands specific technical skills.
Generally, the cost of the work ranges between €200 and €600. This can vary depending on the complexity of the installation, the type of equipment, and the professional’s reference price. It is advisand to request several quotes to find the best value for money.
Price for replacing a manual roller shutter
On average, you should budget €320 to replace your manual roller shutter. If you want a price range, expect between €200 and €600 including installation.
It should be noted that the cost varies depending on the type of equipment. For a PVC construction, the price ranges between €200 and €550. That of the aluminum shutter can be higher, ranging from €250 to €600.
Estimate the amount total incluant pièces et main d’œuvre :
Roller shutter repair: what to do?
With this type of carpentry, the cause of the malfunction is easily detectable. A handy person can take care of it alone once properly equipped.
However, if you lack technical knowledge, it is better to turn to an electrician. When you are not proficient in the field, you risk worsening the situation. In this case, it is unfortunate to have to replace the equipment.
Manual roller shutter repair
Even though the manual roller shutter is very practical, it can wear out or get stuck over time. If the slats jam or the crank turns freely, the problem is easily fixed. But when the slats are damaged, they must be completely replaced.
To do this, start by opening the box then remove the curtain. Remove the damaged slats and install the new parts. The last step is to reassemble the curtain and close the box.
Roller shutter repair near me
Your roller shutter is not working properly. However, you do not know how to repair it. Don’t panic, it is easy to find an electrician.
The internet is not only for shopping but also for finding a professional capable of helping you.
Many websites gather a number of craftsmen. Just specify your region well and you will have access to the contact details of the specialists closest to you.
Price to replace a roller shutter motor
The price depends more specifically on the motor power. For a 10 Nm model, expect prices starting from €20.
If the motor has a power of 20 Nm, the price can rise up to €120. It continues to increase if your motor is powerful with 30 Nm of power. Prepare a budget between €30 and €170.
Price for changing roller shutter curtain
The cost of replacing a curtain starts from €176. Generally, the fees depend on the type of roller shutter.
For a premium model, it is normal for the price to increase compared to a traditional item. Also, the price can vary depending on the color, size, and material of the curtain.
Cheap roller shutter repair
When you compare several quotes, you will surely find the best price for repairing your roller shutter. At minimum, this work costs only €55. If you have a manual roller shutter, its repair costs only €30.
💡 Practical tip: Lubricate the side tracks twice a year with a dry silicone spray. This reduces the motor’s effort and prevents early mechanical blockages.
How to find a good roller shutter repairer in Hauts-de-Seine?
To repair your roller shutter as quickly as possible and obtain a satisfactory result, it is important that you find a good professional. To find one, if you live in the Hauts-de-Seine department in Île-de-France, you can proceed in several ways:
- By word of mouth: ask your relatives if they have ever sought the help of a craftsman to install a roller shutter, awning, or window. If they were satisfied with the work of this professional, then you can look for their address and contact them to entrust your work with peace of mind.
- On a specialized website: there are many platforms online where you can find craftsmen offering this type of service. Since you will find several companies and professionals who can do these repairs, you can request a quote from those who catch your attention, to choose the Hauts-de-Seine roller shutter repairer who offers the best deal.
- Directories: online directories and traditional directories like the Yellow Pages highlight craftsmen near you, based on their specialty and profession. You will therefore be able to choose the one whose skills match your needs.
Faced with the multitude of professionals offering their services on different platforms, you may wonder which specialist you should call for this work? Know that you will have the choice between a carpenter (whose skills are not limited to wood but extend to repairing shutters made of various materials), a locksmith (expert in locking and closing mechanisms), an electrician (who intervenes for the repair of motorized roller shutters), and an expert in installing awnings and roller shutters.
What criteria should be checked to ensure the credibility of a craftsman?
Once you have found a craftsman capable of repairing your roller shutter, you will need to check certain criteria to ensure their reliability. These criteria are as follows:
References and Qualifications:
An expert capable of repairing your roller shutter must have solid references and clear qualifications. You should look for their previously completed work and verify adherence to deadlines as well as the quality of that work. Also, check the reviews and comments from clients on the professional’s website. Additionally, make sure they hold recognized certifications (RGE Label, Qualibat label, and French standards NF, NF closures or Qualicoat in case of replacing a part of the shutter).
Details of the Quote:
A reliable quote is detailed and contains several elements, namely information about materials and supplies, description of the services performed, duration of the work, the price excluding tax and including tax for services, supplies, and labor. This quote should also include any additional costs in case of emergency intervention and the payment terms of the invoice. Also, the artisan’s contact details and their SIRET number must appear on this document.
