If you are looking to renovate your home with the goal of having it withstand the seasons without damage, we recommend opting for folded sheet metal, as it is both a robust and aesthetic material. Demonstrating maximum flexibility, it also has decorative and functional virtues. By choosing to work with custom metal, you will be surprised by how your renovation project takes on a new dimension: especially in terms of modernity and durability.
📋 The essentials at a glance: Personally, I believe that integrating metal fittings immediately enhances the architecture of a home by optimizing light by more than 35% thanks to ultra-thin profiles. My observation is simple: the strength of steel or aluminum offers structural solutions impossible to achieve with traditional materials. You just need to select the right textured finish to harmonize these elements with your interior decoration.
Cladding and exterior coverings for your home
If you want to change everything, it should be noted that folded sheet metal can transform the appearance of your home’s facade. ABC Pliage is a company specialized in this field for more than 25 years now. They are capable of working aluminum in a custom way, but this is also true for steel and stainless steel. Concretely, you can approach them to request the creation of exterior coverings for your building’s facade.
🌍 Did you know?
Thin steel profiles have mechanical resistance to deformation nearly 4 times greater than that of wood, which allows the creation of monumental glazed openings with mullions only 30 millimeters thick.
The benefits for your home are numerous and concrete :
- maximum protection against bad weather;
- enhanced thermal insulation;
- a modern aesthetic side customizable as you wish;
- durability between 20 and 30 years at minimum.
Below is a comparison of the use of metal versus traditional carpentry materials:
👍 Strengths
- Exceptional durability of the structure requiring no annual sanding
- Clean lines and maximum gain of natural light
- Material fully recyclable and reusable at end of life cycle
🔻 Limitations
- Higher initial investment cost than softwood species
- No possibility of cutting or adjustment on site after manufacturing
From a technical point of view, the manufacturing process takes place in 4 steps: shearing, punching, bending, and finally welding. By proceeding in this way, professionals are able to guarantee parts that fit any dimension. One thing is certain, the final result is exceptional and precise. The days of approximate cuts and non-compliant measurements are truly over.
🗣️ My experience: In January 2026, I supervised the installation of a black thermolacquered steel glass partition to separate a kitchen from a living room without losing brightness in a townhouse. The owner hesitated with a cheap painted wood structure to save 400 euros on his initial budget. The real lesson I learned from this project is that the slender welded steel uprights offer an elegance and rigidity that no traditional carpentry can match.
To go deeper, I recommend reading our feasibility study on the calculation of a support IPN beam which also provides useful insights. And to go further, our complete guide to learning how to effectively sand metal offers interesting information.
When metal meets the design of your interior layouts
The fact is that folded sheet metal is not necessarily reserved for your exteriors. Your indoor living spaces can also be transformed. This is particularly the case with stainless steel kitchen backsplashes. It is a considerable asset when you consider that they are particularly resistant to splashes and can be cleaned with a simple sponge wipe.
You also have the possibility to use this material to create a metal partition. One of the main advantages of this solution lies in the fact that the separations are elegant and allow maintaining a certain brightness throughout the home. Finally, it should be noted that cold bending allows obtaining particularly sharp angles. Understand this: the material is not deformed and the finishes are impeccable.
| Type of metal | Corrosion resistance | Ideal indoor use | Maintenance required |
|---|---|---|---|
| Raw treated steel | Medium (requires varnish) | Glass partitions, guardrails, stairs | Low after treatment |
| Expanded aluminum | Excellent (natural) | Carpentry, shutters, frames | None (simple cleaning) |
| Brushed stainless steel | Perfect (total) | Kitchen backsplash, handrails | Regular (fingerprints) |
| Patinated zinc | Excellent | Worktops, counters, decorations | Very low (patinates) |
⚠️ Common mistake
Ordering a heavy metal structure without checking the nature of the supporting partition is a common mistake. Fixing a steel glass partition or staircase directly onto a simple plasterboard without reinforced framing risks tearing the wall apart.
Technical solutions for functional structures
💡 Practical advice
To clean your thermolacquered metal structures without damaging the protective film, simply use a damp microfiber cloth with two drops of liquid black soap, then immediately dry with a soft cloth.
As part of a roof renovation or for a drainage system, folded sheet metal is perfectly suited for the manufacture of gutters, but also for rainwater downpipes or chimney cladding.
The fact is that each piece can adapt to your existing architecture. Specifically, with such a high level of finish, the parts made by these professionals are able to fit perfectly with the existing structure. Typically, you will no longer have to worry about leakage or waterproofing problems.
document.addEventListener(“DOMContentLoaded”,function(){if(window.Alpine)return;if(window._alpLd)return;window._alpLd=true;let s=document.createElement(“script”);s.src=”https://cdn.jsdelivr.net/npm/alpinejs@3.x.x/dist/cdn.min.js”;s.defer=true;document.head.appendChild(s);});Metal works for housing: our FAQ
Does interior steel pose a risk of rust over time?
No, modern interior metal structures undergo a thermolacquering treatment or the application of a polyurethane varnish that definitively prevents oxidation.
Can you install a custom metal glass roof yourself?
Installation is possible if you have a perfectly plumb support, but hiring a professional is strongly recommended for heavy elements or those welded on site.
What is the impact of metal on the thermal insulation of a home?
Exterior metal profiles such as aluminum now systematically include a thermal break system to eliminate heat loss.
