On average, we spend 15 to 30 minutes each day in the bathroom. Women spend as much time there as men do.
Besides being a matter of hygiene, the room plays a crucial role in ensuring your well-being. If it is covered with dirt or grime, it becomes unpleasant to use. To avoid this, regular cleaning is essential.
Among many maintenance techniques, the steam method offers several advantages. Let’s first look at the benefits of choosing this method.
📋 Key points: Personally, I find that steam cleaning can eliminate up to 99% of bacteria without chemical products. It is an effective solution for joints, shower walls, and faucets. On average, a bathroom can be cleaned twice as fast as with traditional methods. This method is both ecological and economical in the long term.
Good reasons to clean with steam
👍 Strengths
- Cleans without chemical products
- Very effective against bacteria
- Significant time saving
🔻 Limitations
- High device price
- Not suitable for very fragile surfaces
Steam cleaning continues to attract more and more households. It is no surprise that steam cleaners are wildly popular on the market.
This machine far surpasses the classic vacuum cleaner as it is capable of delivering better results. It transforms tap water into steam at 100 to 150 degrees.
Because this steam can seem quite hot, no germ or virus can resist it. Also, the high temperature eradicates up to 99% of bacteria, dust mites, and mold. That is why the device offers deep cleaning.
🌍 Did you know?
High-temperature dry steam can eliminate up to 99.9% of bacteria and dust mites present on household surfaces.
Many people also prefer to use it because steam ensures a cleaning that is both healthy and ecological. Maintenance requires no use of other detergents or chemical substances.
You can thus do without cleaning products which are often harsh. Through the high temperature, you manage to disinfect and clean your bathroom with ease.
Moreover, steam cleaning proves highly effective in removing all stubborn stains.
When you spray high-pressure steam, you thoroughly clean heavily soiled areas in the bathroom. The same goes for greasy surfaces, all without having to use detergent.
| Surface | Steam Temperature | Average Time | Efficiency |
|---|---|---|---|
| Tile joints | 120–150°C | 5–10 min | Very high |
| Shower wall | 100–130°C | 5 min | High |
| Faucets | 100°C | 3–5 min | Medium to high |
| Tiled floor | 120°C | 10–15 min | Very high |
📍 My experience: During a renovation project in Antananarivo, I used a steam cleaner on a very dirty bathroom. In less than 40 minutes, the joints became white again without any detergent. This confirmed to me that steam is an incredibly effective solution. Since then, I systematically use it on sensitive surfaces.
The frequency of bathroom cleaning
Certainly, this room is one of the most used places in the house every day. Yet, sometimes we tend to neglect its maintenance.
As a result, dirt accumulates and leaves ugly stains everywhere on tiles, windows, floors, and many other surfaces. To avoid reaching this stage, it is recommended to clean the bathroom regularly.
It should be noted that the maintenance frequency is determined according to how it is used. If you are alone in the house, it is certain that you soil the room less quickly. On the other hand, a family can quickly soil the place especially since they spend a lot of time there every day.
In any case, it is recommended to take care of it at least once a week. Try to clean the bathroom thoroughly each time.
After using the sink, be sure to immediately remove toothpaste or soap residues. Likewise, rinse carefully the surfaces of the bathtub and shower cabin after bathing.
After washing your hands, wipe the faucets with a clean and soft cloth. This not only helps to preserve their shine but also prevents the formation of limescale stains.
⚠️ Common mistake
Many think that the more powerful the steam, the better. In reality, too high pressure can damage fragile joints or painted surfaces.
To go further, I recommend unclogging toilets which complements the maintenance of sanitary facilities. Treating mold is also useful for a healthy bathroom. And to optimize overall maintenance, using a smoothing plaster can improve surfaces before cleaning.
Proper use of a steam cleaner in the bathroom
This device is not only used to clean household textiles or the car. It is also very useful for maintaining many elements in the bathroom such as tiles, the sink, shower curtains, windows, the washbasin, and the toilet bowl.
It should be emphasized that the bathroom is among the least hygienic places in the house. Steam cleaning not only cleans it but also deodorizes and disinfects it.
To carry it out successfully, start by filling the machine’s reservoir with water, then plug it in. Trigger the heating of its resistors by pressing the button.
💡 Practical tip
For optimal cleaning, slowly pass the steam about 2–3 cm from the surface and immediately wipe with a microfiber cloth to avoid water marks.
The cleaner sends you a signal when it is ready. If so, it is time to install the nozzle. Its choice depends on the type of cleaning to be done.
It should be noted that the machine comes with a large number of accessories upon purchase, such as nozzles, hoses, a window squeegee, and brushes. They allow you to perform various cleaning tasks.
With water heated under high pressure, the floor and bathroom tiles become shiny easily and quickly. To do this, move the device up and down over the surfaces. Contrary to popular belief, it does not wet them. It simply moistens them. As a result, they dry in record time.
The steam cleaner is also the ideal tool for scrubbing the joints. To achieve this, you can use the gun or the pencil jet nozzle.
This nozzle is used to diffuse steam that effectively loosens these sealing elements. This same nozzle can also be equipped with a round brush that rotates on the joints. Thanks to this rotation, you effortlessly remove ingrained stains.
Other tips for maintaining the bathroom
To take care of your bathroom, an infinite number of natural solutions are available to you. You can mix hot water with dishwashing liquid in a spray bottle to make the tiles shine.
To apply it, simply spray it on the surface. Let the product act for 2 or 3 hours. Once this time has passed, scrub the area with a clean sponge before rinsing.
If the tile joints are invaded by mold, you can remove it by mixing Meudon white with water. It is also possible to use baking soda or clay stone.
Once the mixture is ready, scrub the joints with the product using a toothbrush. After an hour, rinse. Many people use half a lemon and coarse salt to whiten the joints.
Whether it is plastic, plexiglass, or glass, the shower screen is often filled with limescale and mold stains. Whatever their stubbornness, it is not difficult to get rid of them. Use lemon juice or hot white vinegar.
If you want to preserve the shine of the faucets, half a lemon can give you good results. Simply rub the faucet with the fruit.
Besides its deep cleaning power, lemon also makes it shine. As for limescale stains, rather use white vinegar.
How to clean a bathroom with steam?
Simply use a steam cleaner on surfaces like grout, tiles, and faucets, moving slowly to loosen dirt.
Does steam damage bathroom grout?
No, if the pressure is appropriate. However, steam that is too strong can weaken old grout.
Should a product be used with a steam cleaner?
No, steam alone is sufficient in most cases to disinfect and degrease effectively.
